We used to call them PAN TIES 1

[PhonesBrokeHuh]

I am looking for a cable mount that was once (possibly still is) sold by Premier. We used to use these to screw to a backboard and run cable ties through them to bundle cables. These were white with a small hole on one end and a squared other end with a flat loop for a cable tie to run through(kind of similar to the old beige cable clamps no. 13, but plastic and flat). I have had bad luck trying to track these down, my local supply guys only have the cable saddles that have the screw hole in the center. Let me know if you all can picture my description and know where to get the flat ones.

Big Clem

 

[cwc3]

should no be using cable ties @ all any more!

 

[bkrike]

Are you talking about this?

http://www.panduit.com/products/Products.asp?param=317&ig_id=813

or anything here:

http://www.panduit.com/products/browse2.asp?classlevel=317

 

[PhonesBrokeHuh]

Brike
Those are not the ones i am looking for, when you fasten the cable tight they someimes pull up.

cwc3
I use these to fasten Telco switch tails coming off of phone switches to the wall not data.

 

[bkrike]

I'm at a loss. Do you have one you can take a picture of and upload it?

 

[cwc3]

They may be a 3m product

 

[cwc3]

http://www.hellermann.tyton.com/m_bases.asp

are these it?

 

[DTSMAN]

Are you talking about the flat loops that are perfect far coax cable. They sell those at home depot.

 

[PhonesBrokeHuh]

I will look for a way to post a picture today. I do have a few of them, just can't finda place to re-up.

Big Clem

 

[robertjo24]

Give these a look:

http://www.panduit.com/products/browse2.asp?classlevel=78

http://www.panduit.com/products/browse.asp?classid=311