We used Clarion 4 version 3.101 on a Compaq Deskpro P166 with no probl

[Robert]

We used Clarion 4 version 3.101 on a Compaq Deskpro P166 with no problems at all.<br>
Now we try to use the same program on a Compaq Deskpro EP 6/350 (Pentium II 350)<br>
When running executable at the DOS Prompt it displays the following error:<br>
<br>
WARNING! Error In Floating Poit Value.<br>
Press any Key To Continue,<br>
or Ctrl + Break To Terminate.<br>
<br>
- We pressed "any Key"-<br>
and the the final message to conclude and return to the C: promt:<br>
<br>
Process Terminated By Floating Point Exception.<br>
<br>
Could you give us any advice how to tackle this problem?<br>
We already tried to edit some files with a Diskeditor:<br>
DXVCLA.LIB<br>
DOVCLA.LIB<br>
DDVCLA.LIB all from 50 to CB at the end.<br>
We are now trying to solve the problem with a DOS Extender.<br>
Will not work either according to some sources.<br>
We are becoming desperate<br>
Thanks in advance,<br>
<br>
Robert Sabelis<br>
Entrada<br>
the Netherlands<br>

 

[Djole]

You are not used Clarion 4 version 3.101 because there is no DOS version 4.0<br>
The best way to solve this problem is to work only with DOS extender library DEVCLA.LIB or DESCLA.LIB<br>
<br>
Djole<br>