Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

WDS clients not joining during setup

Status
Not open for further replies.

porkchopexpress

IS-IT--Management
May 26, 2005
3,996
GB
We have just received some PC's with Intel DG14WQ mobo's and are trying to build them from our WDS legacy server. I've added the drivers as per usual and I'm sure it's picking them up as it wouldn't connect until I'd added them to the image. The problem is that the PC doesn't join the domain during setup, it pauses for quite some time at the installing network part then continues, once the build is complete 'ALL' drivers are installed and working but it hasn't joined the domain.

I can see this error in the NetSetup log, NetpGetLsaHandle: LsaOpenPolicy on \\xx.xx.xx failed: 0xc0000022

Anyone come across this issue?

Installing an XP SP3 flat image

The thread below seems to be the same issue, they fixed it but don't specify the GP that they altered. Typical


Thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top