Watchguard WG2500 DHCP Issue

[ale2010]

Hi,

I have a very strange problem with my Watchguard WG2500 on my network. The Watchguard is behind a Switch CISCO WS-C2950.

In this case the Watchguard is the DHCP Server on this network and its start to fill up all the DHCP list with this IP address 0.0.0.0, making that my users can't get a valid IP address and connect to the network. If I give and Static IP to any machine on the network it work fine, otherwise they can't connect at all.

Any help will be appreciated

 

[jheadley]

What version of WFS are you running? I believe the most current build is 5.2.11.