Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Watchguard WG2500 DHCP Issue

Status
Not open for further replies.
ale2010

ale2010

MIS
Oct 5, 2005
2
US
Hi,

I have a very strange problem with my Watchguard WG2500 on my network. The Watchguard is behind a Switch CISCO WS-C2950.

In this case the Watchguard is the DHCP Server on this network and its start to fill up all the DHCP list with this IP address 0.0.0.0, making that my users can't get a valid IP address and connect to the network. If I give and Static IP to any machine on the network it work fine, otherwise they can't connect at all.

Any help will be appreciated
 
Status
Not open for further replies.

Similar threads

SYSUSER2015
  • Locked
  • Question
VPN issue
Replies
0
Views
59
SYSUSER2015
SYSUSER2015
acollard83
  • Locked
  • Question
Avaya SR2330 Issue
Replies
0
Views
55
acollard83
acollard83
jmkelly
  • Locked
  • Question
Which firewall: Cisco ASA or WatchGuard?
Replies
1
Views
65
unclerico
unclerico
jmkelly
  • Locked
  • Question
WatchGuard tunnel switching -- trying to connect 2 tunnels
Replies
5
Views
104
muckermucker
muckermucker
nicksheppard
  • Locked
  • Question
Tempramental vpn data flow issue
Replies
0
Views
66
nicksheppard
nicksheppard

Part and Inventory Search

Sponsor

Back
Top