Watchdog timer Linux Comands

[Imstillhere]

Looking for some Linux help please,

CS1000 7.5

I want to adjust the watchdog timer and number of retries to their max (20 and 1600ms), I was able to find these commands and i can see what the settings are by using the display commands....but changing them is a different story...I know zip about Linux..my set types are i2050. Thank you

Does anyone know the rest of the command to change these settings?

usiGetPhoneRudpRetries(command works,shows setting)

usiSetPhoneRudpRetries(need rest of command)
(Configure the RUDP Retries Count maximum for IP Phones 1 – (10) – 20)

usiGetPhoneRudpTimeout (command works, shows setting)

usiSetPhoneRudpTimeout(need rest of command)
(Configure the RUDP Timeout value (in ms) for IP Phones 50 – (500) – 1600 in increments of 50 milliseconds)

 

[PhonemanSam]

Below is from a Google search

pdt> help usi
usi usi
UNISTIM related commands: UNISTIM related commands:

usiSetPhoneRudpRetries Set RUDP Max Retries Count for IP sets usiSetPhoneRudpRetries Set RUDP Max Retries Count for IP sets
usiGetPhoneRudpRetries Get RUDP Max Retries Count for IP sets usiGetPhoneRudpRetries Get RUDP Max Retries Count for IP sets
usi[highlight #EF2929]Set[/highlight]PhoneRudpTimeout Set RUDP Timeout value (in msecs) for IP sets usiSetPhoneRudpTimeout Set RUDP Timeout value (in msecs) for IP sets
usiGetPhoneRudpTimeout Get RUDP Timeout value (in msecs) for IP sets usiGetPhoneRudpTimeout Get RUDP Timeout value (in msecs) for IP sets
pdt> pdt>


Nortel all the way.