Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Warning BC12 upgrade SMDR output

Status
Not open for further replies.
Hitechbuzz

Hitechbuzz

Technical User
Oct 23, 2002
198
NZ
HI All I recently went through an upgrade BC10--> BC12with DNA 5.2 running on a HP350 this was fine till I went to check the TABS output for the month and I found that some things were not the same nor were they correct the format has been changed. I understand that now in some of the fields there are more bits send forward to cover longer numbers. Some call accounting packages allow for this but TABS did not. So my long suffering TABS Engineer has now got new drivers installed and tests are starting to look good but it is about a month and a half. To get to this point so if anyone says that there is no changes to worry about don't believe them You will need new drivers.
Brian
To see is to know to know is to see.

Cheers Brian
To see is to know To Know is to see
 
Status
Not open for further replies.

Similar threads

jly2680
  • Locked
  • Question
BC12 internal operator calls to CUCM
Replies
0
Views
150
jly2680
jly2680
alethewizard
  • Locked
  • Question
Aastra/Ericsson BP250: upgrade to R18
Replies
0
Views
282
alethewizard
alethewizard
gsirett
  • Locked
  • Question
MD110 - MX-One - SMDR -CIL -TCP/IP current server ip and port
Replies
1
Views
138
fernandomm
fernandomm
fernandomm
  • Locked
  • Question
Call_list fail after upgrade to Mx-One 7.3 sp1
Replies
6
Views
234
RickyPhilip
RickyPhilip
jebi1717
  • Locked
  • Question
Remove / deprogram a VSU card in MD110 BC12.
Replies
0
Views
79
jebi1717
jebi1717

Part and Inventory Search

Sponsor

Back
Top