WARNING: add_spec: No major number for ifp

[sanmi]

My system is hanging & won't boot up.

While trying to configure my qlogic Fiber card, I followed some of the recommendation to do the following.

Use the following commands to remove the ifp or qlc driver.
# rem_drv ifp
# rem_drv qlc
# Use the following commands to remove then add the qla2300 "sd" driver.
#
# rem_drv qla2300
# add_drv -c scsi -i '"pci1077,2300"' -n qla2300
#
# Use the following commands to remove then add the qla2300 "ssd" driver.
#
# rem_drv qla2300
# add_drv -i '"pci1077,2300"' -n qla2300

I removed drv ifp. When I tried to reboot the server, it hangs with the following error message :

The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s4: is stable.
/dev/rdsk/c1t0d0s5: is stable.
/dev/rdsk/c1t0d0s6: is stable.
NIS domainname is emtekhchprod
starting rpc services: rpcbind keyserv ypserv ypbind done.
WARNING: Timed out waiting for NIS to come up
WARNING: add_spec: No major number for ifp
WARNING: add_spec: No major number for ifp

Anyone knows what to do.............

Thanks,
Sanmi