Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

WAP connected to TZ-100 keeps having to be power cycled

Status
Not open for further replies.
smalltownguy

smalltownguy

IS-IT--Management
Aug 22, 2013
56
0
0
US
I have a wireless access point attached to a specific zone on my TZ-100, and every day or so, the WAP needs to be power cycled to regain connection to the outside internet. I've tried 3 different wireless access points, and all act the same - they'll work for the majority of a day or two, but then all of a sudden the WAP will stop accepting connections, and you have to power cycle the WAP.

I have two other TZ-100's that are working fine with similar configurations.

Ideas?

 
Status
Not open for further replies.

Similar threads

Sameer258
  • Locked
  • Question
Need Help to Find ip and mac address with email who one open my email
Replies
0
Views
136
Sameer258
Sameer258
Sparrow4
  • Locked
  • Question
Configure Avaya IPO R11 / VM Pro + Office365 or Exchange for voicemail to email
Replies
2
Views
136
Johnkite
Johnkite
ISDPCMAN
  • Locked
  • Question
Cannot connect to TZ-215 Sonicwall appliance with web browser!
Replies
0
Views
47
ISDPCMAN
ISDPCMAN
Tommy_T
  • Locked
  • Question
Sonic wall - Have an issue remotely connectioning VNC and SMB (and AFP) to one of the 2 ISP circuits
Replies
1
Views
114
nnaarrnn
nnaarrnn
raist3001
  • Locked
  • Question
Unable to remote into PBX behind Sonicwall TZ-190
Replies
1
Views
47
fojin
fojin

Part and Inventory Search

Sponsor

Back
Top