Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Want to know about file systems
- Thread starter nicalwar
- Start date
fstyp should show what you have. What are you trying to mount? [sig]<p>Ed Fair<br><a href=mailto: efair@atlnet.com> efair@atlnet.com</a><br><a href= > </a><br>Any advice I give is my best judgement based on my interpretation of the facts you supply. <br>
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.<br>
[/sig]
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.<br>
[/sig]
If you are trying to access /stand, it mounts as read only by default.
One way around this is to umount /stand and then re-mount /stand
mount /stand
It will re mount as read rewrite.
Although this may not be true if yuor qeustion is in regards to some other filesystem.
[sig]<p>-Danny<br><a href=mailto: > </a><br><a href= > </a><br><br>
<br>
[/sig]
One way around this is to umount /stand and then re-mount /stand
mount /stand
It will re mount as read rewrite.
Although this may not be true if yuor qeustion is in regards to some other filesystem.
[sig]<p>-Danny<br><a href=mailto: > </a><br><a href= > </a><br><br>
<br>
[/sig]
- Status
Similar threads
- Locked
- Question