I have a Telephone number routed over a PRI. I wish to have that number ring at all exts. including a analog loud bell in the shop. After 20 sec I would like the call to go to the VM box of the main ext. I can get the all phones to ring. I cannot figure how to get it to go to VM. Any ideas? I have a 3300 MXe running 9.0
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Want phones to ring then go to VM at main ext. 1
- Thread starter cdpak
- Start date
-
1
- #2
Set the DID to ring the loud bell.
Create Multicall keys of the loud bell on the ringing phones (Limit of 31)
Route or forward the loud bell to VM.
Create mailbox to match digits of loud bell
Create MSG waiting key on main ext associated with loud bell MBX.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
Create Multicall keys of the loud bell on the ringing phones (Limit of 31)
Route or forward the loud bell to VM.
Create mailbox to match digits of loud bell
Create MSG waiting key on main ext associated with loud bell MBX.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
- Status
Similar threads
- Locked
- Question