Want my BCM50 6.0 to Dial external UCx extension 44888 by dialing 74 instead

[RLSbutton]

Is there a way on the BCM to create a "short code" so that when I dial 74, it then dials 44888 over the SIP trunk connection to my E-MetroTel UCx. I want to keep a consistent paging code across my entire platform of a UCx, IP Office and BCM. Problem is 7 is already in use as an outside line code, so is there a way to spoof the BCM to sending the number specifically 74 without interfering with the trunk code of 7?

Joseph Sus Jr. Nortel Enthusiast

http://www.joetheucxguy.com

 

[curlycord]

No sorry.
This is why I suggest always using 2 digit dest codes to dial out such as 91, 92 etc so you will have room to play.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca