Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
wake on lan
- Thread starter glj
- Start date
Hi
The Easiest Way, is with Nim.
Define a Master and all other Machines as Client. ( NIM A-Z )
You can install, boot, maint the Clients in your Environment
Its also Posible to Boot a Machine over Serial Line, or Modem.
The Easiest Way, is with Nim.
Define a Master and all other Machines as Client. ( NIM A-Z )
You can install, boot, maint the Clients in your Environment
Its also Posible to Boot a Machine over Serial Line, or Modem.
The RS6k was designed to be on all the time, I believe, given the way to likes to break on reboots. =) But there could be some way to do it with a remote interface to the service processor. It would have to be one of the newer models, check your SP menu for options. IBM Certified -- AIX 4.3 Obfuscation
- Status
Similar threads
- Locked
- Question