waitting message display do not appear normaly

[DocRobotnik]

Hi !

I have a Compact ICS 4.1.

On Port #03 the waitting message display do not appear normaly since 2 days, on that port there is a M7310.

When i receive a message the Two line display show :

"2013-05-04 15:38
Msg"

Normaly it was show :

"Message
MSG"

I have a other M7310 on the port #01 and it display the waitting message normaly, the problem is when i put a M7208 on port #03 i don't see the "MSG" because it's only display on the 2nd line. The last time it happened since 3 years i had to reset all the KSU to fix that problem, but i wonder if there exist an other solution.


Thanks,
Mike

 

[curlycord]

Do Feature 806 or Feature # 806 to resolve issue.
806 is Static Time.
This allows the larger set to always display time and date and to put the message notification onto the softkey....in your case no softkey on 7208 so remove the 806 5feature.




=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[DocRobotnik]

WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

http://WWWWWWW

IT'S WORKING !!!!! THANK YOU VERY MUTCH! You Saved my KSU Settings wich is very long and complicated and i was not interested to reset it again Thank You again !


Mike