WABE COMMAND

[melhabba]

Goodmorning
any one can inform me to understand what mean CALL PROGRESS STATE in DIS-WABE
DISPLAY-WABE:TYPE=GEN,CD=825;
H500: AMO WABE STARTED
------------------------------------------------------------------------------
| DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS |
------------------------------------------------------------------------------
| | CALL PROGRESS STATE |NODE/DIGIT| RESERVED/CONVERT |
| CODE | 1 11111 11112 22| ANALYSIS | DNI/ADD-INFO |
| |0 12345 67890 12345 67890 12| RESULT | *=OWN NODE |
------------------------------------------------------------------------------
| 825 |. .**** ..*** **... ..... .*| CO | |
------------------------------------------------------------------------------
THANK YOU

 

[sbcsu]

Important one is Call Progress State 6 for incoming calls from the outside

0 - Netroute
1 -
2 - Transfer of internal calls at the attendant console
3 - Transfer of Trunk calls at the attendant console
4 - Attendant Console prefix
5 - Subscriber Prefix
6 - Incoming CO calls with direct inward dialling (DDI)
7 - IDN ? Connection of incoming CO calls with DDI
8 - Consultation hold of an internal party on an internal call (Including TIE and Satellite connections)
9 - Consultation hold of a party on a CO call
10 - NAL ? Station Line incoming
11 - TT - Tie Trunk - Incoming
12 - ZWL ? - Special Inter PBX Line Incoming
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 - Consultation hold of a party from a conference

 

[melhabba]

THANK you sbcsu
thank you very much

 

[adibv]

0
1 Suffix dialing (station / attendant) e.g. extension has dialed a busy or free number, and now wants to activate call back
2
3
4
5
6
7
8
9
10
11
12
13 Seizure of route for data traffic from SAT
14 CHECK mode(Programming mode) on attendant console - the switchboard has entered into its menu and wishes to activate/deactivate a feature via the menu
15 CHECK mode (Programming mode) on digital station i.e. station has entered into the service menu and wishes to activate/deactivate a feature via the menu
16 Seizure in private network
17 Seizure during consultation in private network
18 Single code calling device : Code digits in suffix dialing
19 Expiration of time supervision
20 Function assignment to key on digital station i.e. an extension wants to customize their button map
21 Direct Inward System Access
22

 

[LoPath]

From the 4K V5 AMO guide (same info, just worded a little different):
0 Help CPS for networking (DAR NETRTE)
1 Suffix dialing (for STN user, attendant console, consultation, satellite PABX, tie-trunk traffic (TIE))
2 Switching of in-house call at attendant console
3 Switching of central office call at attendant console
4 Prefix dialing at attendant console
5 Prefix dialing by station user
6 CO incoming DID
7 IDN connection from CO incoming in DID
8 Consultation of station user from in-house call (incl. TIE (tie-trunk) and SAT (satellite PABX))
9 Consultation of a station user from CO call
10 Incoming station line traffic
11 Incoming tie-line traffic
12 Incoming link traffic
13 Seizure from satellite PABX for data traffic
14 CHECK mode on attendant console
15 CHECK mode on Hicom terminal
16 Seizure in private network
17 Seizure in consultation in private network
18 Single code calling device: code digits in suffix dialing
19 Expiry of time supervision
20 Function assignment to key on Hicom terminal
21 Used only in USA
22 Consultation of station user from conference

LoPath
Maintain HiPath 4000 V5 & V6, OpenScape Xpert V4 & V6, OpenScape Xpressions V7, OpenScape Contact Center V8, OpenScape Voice V9