Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

W98 client cannot find W2000 server

Status
Not open for further replies.

hnts

IS-IT--Management
Dec 9, 2003
65
US
I have a small network that consist of a W2K and a Novell 4.11 server and a number of W98 and W2K clients. My print devices are network attacted printer that are connected to the W2K server via TCP/IP. All clients log into the Novell F/S and are authenticated on the W2k server. I run several application on the network like MAS90 for accounting and a few other applications.

All of this was working well but now, suddenly and for no apparent reason, several of the W98 clinets can no longer locate the W2k server. I can ping the IP address of the server and other devices on the network but I cannot access the W2k server. I suspect its a name resolution issue but I can't imagine what took place for two of ten W98 clients to stop communicating with the server.

Any suggestions?
 
might want to try the Win2K forum at Forum616
[smile]
I can't think of what it might be except a User mucking with settings and/or allowing Spyware in......Do the usual AV Scanning....things are going haywire lately

TT4U

Notification:
These are just my thoughts....and should be carefully measured against other opinions.
Backup All Important Data/Docs
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top