I have a client who is using w2k3 server to connect to our vpn3000. For a few years we have had 1 ip address on each side connected. We just recently added another server for him to access but we are having problems. I believe there is a problem with his rules on the server but I don't know enough about the server. When he configures rules for his one server to talk to both of my servers we have a problem. It will connect sometimes and not others, one server will connect while the other will not, etc. Right now as a work around he is manually putting in the one address he needs to get to on my side, and when he needs to get to the other server he changes his rule. I was hoping to find someone that knows 2003 server ipsec rules well enough to help him out. Or can someone point me to some good documentation on IPSEC for W2K3 to Cisco VPN3000?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
w2k3 ipsec configuration to vpn 3000
- Thread starter gsoc
- Start date
Similar threads
- Locked
- Question
- Locked
- Solved
