W2K Server + RAS + 2Leased Lines = problem %(

[Vitos]

Hi folks!
1. I have configured W2K server as remote acces server with
two modems IDC2814BXL+ connected to leased lines.
2. On other W2Kpro I'm cofigure dialout connection on same type modem.
3. When i initiate connections modems are make handshake and turn on 'CD' Led. Workstation says 'Checking username & password'. After 1 min it disconnects.
Modem configoriginate modem) AT &L1 s15=1 x1
(answer modem) AT &L1 X1 S15=3.
Modem driver I used : Inpro IDC native / Null modem.

Please help to solve this s%%t.

 

[ChadStiller]

You need to check the Server logs (all of them, since RAS will write to System and Security at least, and depending on what's going on, possible others). What messages does the server log when the connection fails?

Also make sure that the account you are using to connect with has remote access permissions and is allowed to connect in that manner. It also helps if the workstation you are using is already a member of the domain, although that is not required if you pass domain info with the dial-up.

Chad Stiller, MCSE
Ramcom Technology
cds@ramcom.com