Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VSU Compression

Status
Not open for further replies.

safron

Technical User
Nov 12, 2002
101
AU
Hi,

Has anybody ever had to put compression on VSU2 card to increase the memory space from 3.5mins to 12mins?

If so what would the CONFIG be set to, in the VCCOI for a VSU2?

Also I was womdering about any consequences of doing this.

Thanks

Saf!
 
The voice compression potion for a VSU card is stated when you initiate the VSU card (RAEQI). The parameter COMPR (optional) is used to determine wether it's compressed or not.

Also from Alex:
"Contents of the VSU board will not be played if the compression option is switched from enabled to disabled or vice versa."

Not sure if VCCOI command will work, if you don't have any important announcements it's worth trying maybe?
 
vccoi is for SPU2 boards, not for VSU

if change to compression mode like slash stated, you must re-record your messages

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Hi...

Unfortunately i'm unable to take the risk of loosing the announcements by trying the VCCOI command.
I dont think this would work anyway without COMPR set on the RAEQI.
It take it the only way around it is to end all the RA configuration, which is not good as there is a lot of it!
Then re-configure it all using compression=yes.

Thanks Slash!

 

More info...

When trying to record a message, i get response "no memory available" and i get bit 4 in the blocking field, then you get RTNR when dialling the VSU, untill the card is restarted. Obviously no speech space left.

I now need to implement compression on the VSU2 in order to get12mins speech. Which at present according to Alex has only 3.5 mins speech.

The question is "Do i need to totally end all the RA comands, to re-assign the VSU (raeqi:compression=yes)and re-record all messages,In order to increase my speech time to 12 mins"?
Or can i overight the raeqi and rerecord the messages, and get my 12 mins this way?

thanks!!!
 
I think the safest option is to end all of them. Otherwise you could risk having 3.5 minutes of uncompressed speech taking up space which you can't use and possibly can't end??

You're going to have to re-record them all anyway so you may as well do it cleanly.

If in doubt, take it out :eek:D

Regards,
Slash
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top