For about 3 months now I have had a Linksys VPN router installed in the main office and using SSH Sentinel I would VPN in. Luckly the VPN still works. But for some reason I cannot connect to a machine on the interal side after I make the VPN connection. I used to just go to START -> RUN \\192.168.1.10
but when I try to go to that machine I get an error after 30seconds or so that says "\\192.168.1.10 network path was not found" but I can ping it.
yet I can get to other machines. So of course to me it sounds like maybe somebody on that machine did a windows update or firewall was turned on. But they claim they have changed nothing. I have called other people that are directly connected to that network and they say they can get to \\192.168.1.10 just fine.
Is there anything I am missing? I don't get how it worked before, now it doesn't, but I can still get to other machines.
Thanks!
but when I try to go to that machine I get an error after 30seconds or so that says "\\192.168.1.10 network path was not found" but I can ping it.
yet I can get to other machines. So of course to me it sounds like maybe somebody on that machine did a windows update or firewall was turned on. But they claim they have changed nothing. I have called other people that are directly connected to that network and they say they can get to \\192.168.1.10 just fine.
Is there anything I am missing? I don't get how it worked before, now it doesn't, but I can still get to other machines.
Thanks!