I have a Cisco 827 connected to a NT4 Server (seperate NIC)and am trying to get VPN configured to work with Windows 9x and Windows 2000 clients without success. The server has RRAS installed and configured with a range of IP addresses and dial-up works fine but not VPN. When we connect we are able to get a connection authenticated to the network but are unable to see or ping anything on the network (including the router internal IP). At first Cisco had me install their VPN client, but then found it didn't work on a Windowss 2000 machine so I need to connect without extra software. My internal network is 10.127.1.x, the router is on 10.127.5.1 connected to NIC 10.127.5.2 and my dialup and VPN connection assigns 10.127.1.70 - 10.127.1.80 based on an ipconfig command.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VPN with PPTP only
- Thread starter techshoot
- Start date
