VPN with netgear FVS318 Firewall Router

[liaml1]

Hello to all. I am trying to connect to my office where I have a Netgear FVS318 VPN Firewall router but I seem to be having some trouble. I am using the Netgear Prosafe VPN client software. Here is a copy of my log:

: 20:41:11.421 Filter table loaded.
11-17: 20:41:18.359
11-17: 20:41:18.359 My Connections\headoffice - Initiating IKE Phase 1 (IP ADDR=207.42.135.119)
11-17: 20:41:18.625 My Connections\headoffice - SENDING>>>> ISAKMP OAK AG (SA, KE, NON, ID, VID 5x)
11-17: 20:41:21.718 My Connections\headoffice - RECEIVED<<< ISAKMP OAK AG (SA, KE, NON, ID, HASH, VID, NAT-D 3x)
11-17: 20:41:21.718 My Connections\headoffice - Peer is NAT-T draft-01 capable
11-17: 20:41:21.718 My Connections\headoffice - NAT is detected for Client
11-17: 20:41:23.062 My Connections\headoffice - SENDING>>>> ISAKMP OAK AG *(HASH, NAT-D 2x, NOTIFY:STATUS_INITIAL_CONTACT)
11-17: 20:41:23.062 My Connections\headoffice - Established IKE SA
11-17: 20:41:23.062 MY COOKIE 38 5 fc a3 97 b6 e9 42
11-17: 20:41:23.062 HIS COOKIE e7 3c 87 c6 72 ff bd 5c
11-17: 20:41:24.562 My Connections\headoffice - Initiating IKE Phase 2 with Client IDs (message id: BBC18470)
11-17: 20:41:24.562 Initiator = IP ADDR=192.168.2.1, prot = 0 port = 0
11-17: 20:41:24.562 Responder = IP SUBNET/MASK=192.168.2.0/255.255.255.255, prot = 0 port = 0
11-17: 20:41:24.562 My Connections\headoffice - SENDING>>>> ISAKMP OAK QM *(HASH, SA, NON, KE, ID 2x)
11-17: 20:42:03.687 My Connections\headoffice - RECEIVED<<< ISAKMP OAK INFO *(HASH, DEL)
11-17: 20:42:03.687 My Connections\headoffice - Deleting IKE SA (IP ADDR=207.42.135.119)
11-17: 20:42:03.687 MY COOKIE 38 5 fc a3 97 b6 e9 42
11-17: 20:42:03.687 HIS COOKIE e7 3c 87 c6 72 ff bd 5c

I hope this was helpful and will assist someone in helping me.

Liam