chaswilcox
Technical User
We have a router firewall set up on a static IP 768/768 adsl line (using PPOE).
I am looking to configure a w2k vpn server to allow access to 2-10 clients to our internal network. In my reading, I have noticed numerous posts about not being able to see network hosts and/or browse internet through VPN's that often refer to subnet and or routing issues.
Could someone suggest an appropriate architecture/subnet scheme for this set up:
router/firewall->
local lan->
W2K SBS server (vpn server and file server in same box)
client IP pool .
In setting up the VPN server, what prototcol is suggested, and should I use the wizard or manually configure?
Thanks-
C
I am looking to configure a w2k vpn server to allow access to 2-10 clients to our internal network. In my reading, I have noticed numerous posts about not being able to see network hosts and/or browse internet through VPN's that often refer to subnet and or routing issues.
Could someone suggest an appropriate architecture/subnet scheme for this set up:
router/firewall->
local lan->
W2K SBS server (vpn server and file server in same box)
client IP pool .
In setting up the VPN server, what prototcol is suggested, and should I use the wizard or manually configure?
Thanks-
C