VPN Tunnel between Linksys WRV54G and CISCO PIX

[dulem]

Hello,
Are somebody configured 3DES tunnel between them?

 

[MattWray]

I have done it between several RV082's and the PIX. What are you running into? They are probably similar...

Thanks,

Matt Wray

GFH

http://www.sss-steel.com

 

[dulem]

I'm interesting for this specific model. I'm able to exchange keys (QM_IDLE) status on the PIX but I can't establish Phase 2 tunnel. On the Linksys side status is waiting for connection.
On the Linksys site I've found only example how to connect Linksys to Windows server.
Thanks
Dusan

 

[js2801]

Sounds like you're close Dulem. Try "no-xauth" and "no-config-mode" on the "isakmp key" command on the PIX. Turn off "ipsec passthru" on the Linksys.