CathodeRay
MIS
First, I'm NOT trying to use the VPN feature of this router. Rather, I'm trying to VPN to a workstation in our office simply *through* this router.
If I put the workstaton's IP address in the DMZ on the router, the VPN from the outside works fine. If I tun off the DMZ, I can't connect.
I do have port 1723 forwarded, and I have PPPTP passthrough enabled on the router.... but I don't see anything about forwarding GRE 47.
It would seem to me that if I put the workstation's IP in the DMZ, and it works, then I should be able to make some configuration change so that it would work with the DMZ off.
Is it GRE 47 I'm missing here? Something else?
If I put the workstaton's IP address in the DMZ on the router, the VPN from the outside works fine. If I tun off the DMZ, I can't connect.
I do have port 1723 forwarded, and I have PPPTP passthrough enabled on the router.... but I don't see anything about forwarding GRE 47.
It would seem to me that if I put the workstation's IP in the DMZ, and it works, then I should be able to make some configuration change so that it would work with the DMZ off.
Is it GRE 47 I'm missing here? Something else?