I have a PPTP RAS server setup on at WIN2K server. The server is on the inside of a PIX520 firewall. I am receiving an error 800 from an XPP client also within the firewall when trying to check the connections. I have the appropriate conduits and static addresses in the PIX configuration. Is there something else I'm missing?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VPN through PIX firewall
- Thread starter mdabney
- Start date
rsivanandan
IS-IT--Management
Are you allowing PPTP ports to come in? Check that.
Cheers,
Rajesh
Cheers,
Rajesh
- Thread starter
- #3
Yes. I able to solve this by turning off the static IP addresses I had for VPN clients and let the remote network assign them. I think that I was having a problem with name resolution on the DNS server for the additional octet.
Thank you for your response.
Thank you for your response.
- Status
Similar threads
- Locked
- Question