VPN Setup with 2 nics

[moviejunkie]

I am running a windows 2003 r2 server with 2 nics, I would like to set up vpn access with it. My nics have the ip address: 192.168.11.10 and 192.168.11.11 When I turn on the other I can not connect with the server on a client pc.

I have ran the vpn wizard, what is my next step? What ports do I have to forward on my router(I have a cable/dsl wireless router)

 

[dberg35]

What are you trying to accomplish?

 

[moviejunkie]

I am sorry, I probably should have put this in 2 diffrent threads.

1) I need to run 2 nics one will be for local access and the 2nd will be for VPN access. The trouble is that when I enable both nics I can not connect to the server locally

My ips are setup something like this: nic1 192.168.11.10
nic2 192.168.11.11

2) After running the remote access and routing wizard, what ports do I have to forward from my dsl router? (I do have a static IP address from my ISP)

 

[dberg35]

Are you looking to access the server remotely? If so than that can be done differently. If it is accessing the server than you can skip what you are trying and set up a router and forward the server IP to port 3389. After that install Terminal Service in admin mode and use RDP to connect.