VPN / RAS

[scoobydoo26]

I'm looking to setup a VPN connection for users to access from home or client sites. I have novell 4.x and Nt 4.0 running. I have not setup RAS or VPN with Novell before and would like some advice.

thanks

 

[TheBoySmith]

Bordermanager VPN is fairly straight forward. Make sure you load the vpn client on the home pc and all should be OK.

The documentation and TID's for it will sort you out. Lee Smith
Xenon Network Services
Snr. Technical Support
LSmith@xenon-uk.co.uk

 

[scoobydoo26]

lee is there a TID number in particular i should look at?
With bordermanager VPN my users would still gain access to the NT box in the network correct?
thanks.

 

[TheBoySmith]

They can gain access to anything as long as the protocol they run is the same as the network device, i.e run IP and IPX over the VPN.

You can just run IP.

Some tid's
10011002
10051912
10025134

The first TID is how to do it.
The others are trouble shooting.

Make sure you have latetst patches for server and workstation. Lee Smith
Xenon Network Services
Snr. Technical Support
LSmith@xenon-uk.co.uk