Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VPN Phone back to ASA, "IKE Phase 2 no response" 1

Status
Not open for further replies.

dsm600rr

IS-IT--Management
Nov 17, 2015
1,444
US
Hello all,

I know this is not an ASA Forum however I figured someone here has some experience.

I am VERY New with the ASA, so bear with me.

The phone is getting stuck at: "IKE Phase 2 no response"

2021-09-27_16-13-09_zfitx8.png



For my IKE Phase 2 I have:
- No PFS
- AES-128
- SHA-1

2021-09-27_16-18-46_wouszb.png


Suggestions?

ACSS
 
icet500: Thank you for the reply. Being new with the ASA, I am not sure exactly what you are referring to. Can you expand a bit? Thank you.

ACSS
 
you should watch ASA videos on youtube atleast, any type of dialin/groupvpn will have a name associated to it, along with auth credentials or just psk. This is avaya forums, not cisco.

______________________
|........................................|
|.....i.eat.bunny.children......|
|______________________|
(\__/) ||
(•Y•). ||
/ < )<||
 
Ended up getting it working. Needed to add a route from the VPN DHCP subnet to the IPO subnet and all is well.


ACSS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top