VPN only works when wired

[statesofdurd]

I can remotley connect to my network at work through Cisco VPN client if my lap top is physically wired to my router. Not a problem.

However, when I try and access the network wirelessly, the client connects fine, and the concentrator in my office registers me as being on the network, but I can't do anything. I can't see any mapped drives or get mail.

I can connect to the internet etc not problem wired or without. Anybody got any ideas?

Thanks,

ian.

 

[msworld]

Is it possible wireless IP range ist he same the remote site? These case studies may help,

Cannot access resources after establishing VPN
Therefore, both VPN server and client use the same IP address. To solve this issue, ... The VPN client receives the same IP of the VPN server ... ...

http://www.chicagotech.net/casestudy/vpnsameip1.htm

Both VPN sites are in the same IP range
A: You will not be able to do this with a VPN connection if both subnets are using the same IP subnet. What you are setting up is a LAN to LAN (also called ...

http://www.chicagotech.net/Q&A/vpn20.htm

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on

http://www.HowToNetworking.com