Here's a quick one, I have a few small systems with a basic ADSL at each. I want to attached 5505s to the inside of the ADSL, have it set to a DMZ device on the DSL or port forwarded to.
Because of bandwidth limitations, I only want it to connect to HO, or send data, when requested by an internal client.
I know with a pc we could set a PPTP or L2TP VPN on the client machine to connect on demand.
Could I set the 5505 to sit idle, and then connect to a remote Head Office 5550, when data was matched to a desination, and disconect when done?
I have only really found pieces on DSL based Demand Dial, over L2TP, to LNS, etc
Thanks
Gurner
Because of bandwidth limitations, I only want it to connect to HO, or send data, when requested by an internal client.
I know with a pc we could set a PPTP or L2TP VPN on the client machine to connect on demand.
Could I set the 5505 to sit idle, and then connect to a remote Head Office 5550, when data was matched to a desination, and disconect when done?
I have only really found pieces on DSL based Demand Dial, over L2TP, to LNS, etc
Thanks
Gurner