VPN Issues Pix 501 no traffic. Help greatly appreciated.

[nguyen23464]

I am new to this, so I really appreciate any help possible.

The Pix 501 works and the VPN Client 5.0 is able to connect to the Pix. Gets the VPN dhcp address as well.

But I am unable to ping anything inside the network nor the Pix.
Windows firewall is off on the laptop with the VPN client.

10.10.10.3 is the pix
10.10.20.1 is my wireless router behind the pix.

Nat is turned off on my netgear router.

I listed my config below.

thanks all.




---------------------------------------------------

interface ethernet0 auto
interface ethernet1 100full

nameif ethernet0 outside security0
nameif ethernet1 inside security100

enable password qfrwbPitmOm0w19T encrypted
passwd qfrwbPitmOm0w19T encrypted

hostname pix
domian name xxxxxx

fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719do
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69

names

pager lines 24
mtu outside 1500
mtu inside 1500

ip address outside dhcp setroute
ip address inside 10.10.10.3 255.255.255.0
ip audit info action alarm
ip audit attack action alarm

pdm logging informational 100
pdm history enable
arp timeout 14400

global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0

timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local

http server enable
http 10.10.10.0 255.255.255.0 inside

no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable

telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80


access-list 101 permit ip 10.10.10.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list 101 permit ip 10.10.20.0 255.255.255.0 192.168.1.0 255.255.255.0

access-list NONAT permit ip 10.10.10.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list NONAT permit ip 10.10.20.0 255.255.255.0 192.168.1.0 255.255.255.0

ip local pool vpnpool1 192.168.1.100-192.168.1.200

nat (inside) 0 access-list NONAT

sysopt connection permit-ipsec

crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto dynamic-map dynmap 10 set transform-set myset
crypto map mymap 10 ipsec-isakmp dynamic dynmap

crypto map mymap interface outside


isakmp enable outside
isakmp identity address

isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400


vpngroup infonetgroup address-pool vpnpool1
vpngroup infonetgroup dns-server 4.2.2.2
vpngroup infonetgroup wins-server 4.2.2.2
vpngroup infonetgroup default-domain xxxxxxxx
vpngroup infonetgroup split-tunnel 101
vpngroup infonetgroup idle-time 1800
vpngroup infonetgroup password xxxxxxxx

 

[unclerico]

change your split-tunnel ACLs to be standard ACLs and specify only the destination subnets that should be reached via the VPN tunnel

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

 

[nguyen23464]

I am sorry but I am so new to this. Would this be the correct entry?
Get rid of both my 101 ACL's and insert:


access-list 101 permit ip 192.168.1.0 0.0.0.254

 

[unclerico]

Close: access-list 1 permit ip 192.168.1.0 255.255.255.0

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)