VPN in, check.. VPN out, no go!

[TopRung]

Setup: Pix 506e, and Cisco 2821 router, Server 2000 SP3

Using Microsft's VPN solution.


I can VPN to my server from the outside with no problems, but when clients are in my LAN and try to VPN out to another office (not related in anyway to my LAN), they can not connect.

I just want to know if there can be something internal on my PIX or ROuter that needs to be configured to allow this outgoing connection. What should i check to see if the problem is on my end or if it is on the other locations end???


Thank you in advance.

 

[TopRung]

In looking around, it appears that a rule needs to be added to my PIX to allow the outgoing traffic... hmmmm, any tips out there?

Thnx