Hi,
I have used a long time a Frame Relay VPN that has many remote subnets and a concentrator subnet like description below. Recently, I install internet cable access at Central Office (Frame Relay Concentrator) and other cable internet access in other remote office to begin migrate all Frame Relay Network to Linksys VPN network. I configured one Linksys BEFSX41 at both cable internet access, VPN is connected and I can ping and connect from concentrator to new remote office by Linksys VPN. My problem is that I cant ping and connect from remote frame relay VPN offices to new remote Linksys VPN office (Interoperability between FRame Relay network with Linksys IPSec VPN network). I can ping from FRame Relay concentrator Cisco router to remote new Linksys VPN network. But I cant ping or connect from remote frame relay VPN offices to new Linksys IPSec VPN router. I execute a traceroute from remote Frame relay cisco router and it stops at Linksys Router at Central Office (Concentrator)
Remote Frame Relay offices subnets
192.168.1.0/24
192.168.2.0/24
192.168.3.0/24
.
.
.
192.168.31.0/24
192.168.32.0/24
Concentrator Frame Relay subnet
192.168.50.0 255.255.255.0
Concentrator IP Address
192.168.50.254
Route Table at Cisco Frame Relay concentrator router
ip route 192.168.0.0 255.255.224.0 10.254.0.1
ip route 192.168.50.0 255.255.255.0 Ethernet0
ip route 192.168.51.0 255.255.255.0 10.254.50.2
ip route 192.168.52.0 255.255.255.0 10.254.50.6
ip route 192.168.53.0 255.255.255.0 10.254.50.10
ip route 192.168.54.0 255.255.255.0 10.254.50.14
ip route 192.168.55.0 255.255.255.0 10.254.50.18
ip route 192.168.56.0 255.255.255.0 10.254.50.22
ip route 192.168.57.0 255.255.255.0 10.254.50.26
ip route 192.168.58.0 255.255.255.0 10.254.50.30
ip route 192.168.59.0 255.255.255.0 10.254.50.34
ip route 192.168.60.0 255.255.255.0 10.254.50.38
ip route 192.168.62.0 255.255.255.0 192.168.50.250 (new remote Linksys VPN office route)
Linksys BEFSX41 configuration installed at concentrator to interoperability with Frame Relay VPN
LAN IP Address
192.168.50.250
VPN Tunnel: Enabled
Tunnel Name: Teste
------------------------------------------------------------
Local Secure Group:
IP Addr.SubnetIP Range
IP: 192.168.0.0
Mask: 255.255.0.0
------------------------------------------------------------
Remote Secure Group:
IP Addr.SubnetIP RangeHostAny
IP: 192.168.62.0
Mask: 255.255.255.0
------------------------------------------------------------
Remote Security Gateway:
IP Addr.FQDN
Fully-Qualified Domain: teste.dyndns.org
------------------------------------------------------------
Encryption: 3DES
Authentication: SHA
------------------------------------------------------------ Key Management
Auto. (IKE)
PFS: Enabled
Pre-shared Key: 1234
Key Lifetime: 3600 Sec.
------------------------------------------------------------
Status Connected
Sorry my english ! And help me ... PLEASE !
Topoh
I have used a long time a Frame Relay VPN that has many remote subnets and a concentrator subnet like description below. Recently, I install internet cable access at Central Office (Frame Relay Concentrator) and other cable internet access in other remote office to begin migrate all Frame Relay Network to Linksys VPN network. I configured one Linksys BEFSX41 at both cable internet access, VPN is connected and I can ping and connect from concentrator to new remote office by Linksys VPN. My problem is that I cant ping and connect from remote frame relay VPN offices to new remote Linksys VPN office (Interoperability between FRame Relay network with Linksys IPSec VPN network). I can ping from FRame Relay concentrator Cisco router to remote new Linksys VPN network. But I cant ping or connect from remote frame relay VPN offices to new Linksys IPSec VPN router. I execute a traceroute from remote Frame relay cisco router and it stops at Linksys Router at Central Office (Concentrator)
Remote Frame Relay offices subnets
192.168.1.0/24
192.168.2.0/24
192.168.3.0/24
.
.
.
192.168.31.0/24
192.168.32.0/24
Concentrator Frame Relay subnet
192.168.50.0 255.255.255.0
Concentrator IP Address
192.168.50.254
Route Table at Cisco Frame Relay concentrator router
ip route 192.168.0.0 255.255.224.0 10.254.0.1
ip route 192.168.50.0 255.255.255.0 Ethernet0
ip route 192.168.51.0 255.255.255.0 10.254.50.2
ip route 192.168.52.0 255.255.255.0 10.254.50.6
ip route 192.168.53.0 255.255.255.0 10.254.50.10
ip route 192.168.54.0 255.255.255.0 10.254.50.14
ip route 192.168.55.0 255.255.255.0 10.254.50.18
ip route 192.168.56.0 255.255.255.0 10.254.50.22
ip route 192.168.57.0 255.255.255.0 10.254.50.26
ip route 192.168.58.0 255.255.255.0 10.254.50.30
ip route 192.168.59.0 255.255.255.0 10.254.50.34
ip route 192.168.60.0 255.255.255.0 10.254.50.38
ip route 192.168.62.0 255.255.255.0 192.168.50.250 (new remote Linksys VPN office route)
Linksys BEFSX41 configuration installed at concentrator to interoperability with Frame Relay VPN
LAN IP Address
192.168.50.250
VPN Tunnel: Enabled
Tunnel Name: Teste
------------------------------------------------------------
Local Secure Group:
IP Addr.SubnetIP Range
IP: 192.168.0.0
Mask: 255.255.0.0
------------------------------------------------------------
Remote Secure Group:
IP Addr.SubnetIP RangeHostAny
IP: 192.168.62.0
Mask: 255.255.255.0
------------------------------------------------------------
Remote Security Gateway:
IP Addr.FQDN
Fully-Qualified Domain: teste.dyndns.org
------------------------------------------------------------
Encryption: 3DES
Authentication: SHA
------------------------------------------------------------ Key Management
Auto. (IKE)
PFS: Enabled
Pre-shared Key: 1234
Key Lifetime: 3600 Sec.
------------------------------------------------------------
Status Connected
Sorry my english ! And help me ... PLEASE !
Topoh