Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VPN - Design

Status
Not open for further replies.
Jul 1, 2003
6
GB
Hi

I have the following setup

Internet connection --- router --- pix --- internal network

The router - pix is on 10.10.10.0 and the internal network is 172.16.1.0, pix ip outside 10.10.10.75 internal 172.16.1.1.

I have set-up my PIX so that this accepts VPN connections - this is working lovely on the pix outside interface. I have tried to get this working on the internal interface but can't - is this possible? At the moment I have had to setup ACLs for any traffic that goes to the internal network, but would rather have the VPN client appear on the internal network.
 
I am not clear on what you are trying to accomplish.


Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top