VPN Connection Between FVS318 and Prosafe

[mcarvalho]

Hi there,

i'm having quite some problems setting up the VPN connections (both client to gateway and gateway to gateway) of the NETGEAR FVS318.

Regarding the client-to-gateway connection using the Prosafe VPN client these are the logs when i try to connect:

2-01: 13:25:32.953 My Connections\ltest - Initiating IKE Phase 1 (IP ADDR=82.xxx.xxx.xxx)
2-01: 13:25:32.953 My Connections\ltest - SENDING>>>> ISAKMP OAK MM (SA, VID 2x)
2-01: 13:25:33.015 My Connections\ltest - RECEIVED<<< ISAKMP OAK INFO (NOTIFY:NO_PROPOSAL_CHOSEN)
2-01: 13:25:33.015 My Connections\ltest - Discarding IKE SA negotiation

The logs on the FVS318 side are the following:

[2007-02-01 05:25:32][==== IKE PHASE 1(from 213.xxx.xxx.xxx) START (responder) ====]
[2007-02-01 05:25:32]**** RECEIVED FIRST MESSAGE OF MAIN MODE ****
[2007-02-01 05:25:32]<POLICY: > PAYLOADS: SA,PROP,TRANS,VID,VID
[2007-02-01 05:25:32]ERROR# NO MATCHING ISAKMP PROPOSAL FOR DIALUP CASE
[2007-02-01 05:25:32]SENDING NOTIFY MSG:
[2007-02-01 05:25:32]NO_PROPOSAL_CHOSEN
[2007-02-01 05:25:32]**** SENT OUT INFORMATIONAL EXCHANGE MESSAGE ****
[2007-02-01 05:25:32]<POLICY: > PAYLOADS: NOTIFY

I've tried to follow the instructions on the Netgear manual to set up a client to gateway connection but aparently with no great luck.

Does anyone has a clue about what is hapenning here?

Thanks in advance