VPN Confusion

[TheStressFactor]

Hey All,

Quick question, I am a bit confused on implementing VPN. I have my PIX515E up and running nicely with a basic config. I have entered my vpdn commands. Now at this point...do I just install the cisco vpn client and have my users log in or do I need to configure my w2k server for vpn as well and use the microsoft vpn client for my end users? Any help or insight would be greatly appreciated. Thank you.

Patrick

 

[TheStressFactor]

Also, here is my config...just an fyi there is a router in front of the firewall

PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 intf2 security10
enable password 7DeygvHKjBuxNxrP encrypted
passwd 0fTucaWSYztRT69N encrypted
hostname marinofw1
domain-name marinoware.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
pager lines 24
interface ethernet0 100basetx
interface ethernet1 100basetx
interface ethernet2 auto shutdown
mtu outside 1500
mtu inside 1500
mtu intf2 1500
ip address outside 63.102.156.70 255.255.255.240
ip address inside 192.168.3.1 255.255.255.0
ip address intf2 127.0.0.1 255.255.255.255
ip audit info action alarm
ip audit attack action alarm
ip local pool marinowarelocalpool 192.168.3.40-192.168.3.45
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
nat (inside) 1 192.168.3.0 255.255.255.0 0 0
nat (inside) 1 192.168.5.0 255.255.255.0 0 0
conduit permit tcp host 63.102.156.67 eq smtp any
route outside 0.0.0.0 0.0.0.0 63.102.156.65 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 s
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.3.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
no sysopt route dnat
telnet 192.168.3.0 255.255.255.0 inside
telnet timeout 60
ssh 206.126.178.69 255.255.255.255 outside
ssh timeout 5
vpdn group 1 accept dialin pptp
vpdn group 1 ppp authentication mschap
vpdn group 1 client configuration address local marinowarelocalpool
vpdn group 1 client configuration dns 192.168.3.7
vpdn group 1 client configuration wins 192.168.3.7
vpdn group 1 pptp echo 60
vpdn group 1 client authentication local
vpdn username papinto password *********
vpdn enable outside
terminal width 80
Cryptochecksum:133d98f81c16a0ae2ab12882cf250fdd
: end
marinofw1# config t
marinofw1(config)# no ssh 206.126.178.69 255.255.255.255 outside
marinofw1(config)# write mem
Building configuration...
Cryptochecksum: d34d2cac 85db20e0 ee493e06 5b05aa94
[OK]
marinofw1(config)# sh run
: Saved
:
PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 intf2 security10
enable password 7DeygvHKjBuxNxrP encrypted
passwd 0fTucaWSYztRT69N encrypted
hostname marinofw1
domain-name marinoware.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
pager lines 24
interface ethernet0 100basetx
interface ethernet1 100basetx
interface ethernet2 auto shutdown
mtu outside 1500
mtu inside 1500
mtu intf2 1500
ip address outside x.x.x.70 255.255.255.240
ip address inside 192.168.3.1 255.255.255.0
ip address intf2 127.0.0.1 255.255.255.255
ip audit info action alarm
ip audit attack action alarm
ip local pool localpool 192.168.3.40-192.168.3.45
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
nat (inside) 1 192.168.3.0 255.255.255.0 0 0
nat (inside) 1 192.168.5.0 255.255.255.0 0 0
conduit permit tcp host x.x.x.67 eq smtp any
route outside 0.0.0.0 0.0.0.0 x.x.x.65 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 s
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.3.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
no sysopt route dnat
vpdn group 1 accept dialin pptp
vpdn group 1 ppp authentication mschap
vpdn group 1 client configuration address local localpool
vpdn group 1 client configuration dns 192.168.3.7
vpdn group 1 client configuration wins 192.168.3.7
vpdn group 1 pptp echo 60
vpdn group 1 client authentication local
vpdn username myname password ************
vpdn enable outside
terminal width 80