vpn client

[ChicagoRookie]

hey guys.. any sugestion would be appreciated..

I am using 3060 sonicwall.. then.. I followed any possible setting for vpn client..

then install client to the my labtop.. I tried then connet to it.. But I cannot get virtual IP address..
Everything looks fine..

It seems estabishment is fine, but I can not get ip//
when I check it at router, user properly logged in..

How Can I get ip address>?

office (10.0.1.X)-3060
home(192.168.1.X)- dlink wireless

i am totally lost what I have to do..

 

[SkreeM]

You may want to try disabling any firewall/security software you have installed, especially things like norton personal firewall to see if that is blocking some of the traffic. Also when you do ipconfig/all how many network infaces have you got, are any configured statically to the 10 subnet.

Skr

 

[ShackDaddy]

Make sure that you've configured a way for the clients to get IP addresses. You should have the option to supply them from a configured pool in the SonicWall, or allow the DHCP server in your network to provide one. If neither is set up, your client won't get an IP.

ShackDaddy
Shackelford Consulting