I am running a symantec 200r behind an adsl router/firewall (supplied by the ISP) and having problems with getting VPN to work.
I've done the updates, configured as per the recommendations on previous threads in the symantec section - yet it will not work and I can only assume it is something to do with the adsl router running nat. I have a public IP on the router, 192.128.1.1 inside the router, 192,168.1.2 on the outside (WAN1) interface on the 200R and then run a 192.168.0.0 network internally.
The error message on the client is a 3360 "client ID or unique key do not exist" and the firewall shows:
08/18/2004 07:44:28.58 vpnclient - STATE_AGGR_R1: from STATE_AGGR_R0; sent AR1, expecting AI2
08/18/2004 07:44:28.88 vpnclient - Receive ISAKMP OAK INFO (PAYLOAD_MALFORMED)
Any suggestions would be greatly appreciated
I've done the updates, configured as per the recommendations on previous threads in the symantec section - yet it will not work and I can only assume it is something to do with the adsl router running nat. I have a public IP on the router, 192.128.1.1 inside the router, 192,168.1.2 on the outside (WAN1) interface on the 200R and then run a 192.168.0.0 network internally.
The error message on the client is a 3360 "client ID or unique key do not exist" and the firewall shows:
08/18/2004 07:44:28.58 vpnclient - STATE_AGGR_R1: from STATE_AGGR_R0; sent AR1, expecting AI2
08/18/2004 07:44:28.88 vpnclient - Receive ISAKMP OAK INFO (PAYLOAD_MALFORMED)
Any suggestions would be greatly appreciated