VPN client cannot connect to inside network

[splicerguy]

Hi,

My clients are able to connect to my PIX using the Cisco VPN client, however they cannot connect to any internal computer.

I've tried a bunch of different changes to my config (based on other people's similar problem), but I've probably just muddle it up more.

Here's my config. I'm a bit of a newbie, but assume it has to do with NAT?



PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto shutdown
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 intf2 security4
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pix515
domain-name mynetwork
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list nonat permit ip host 192.168.0.50 host 192.168.0.70
access-list SPLIT permit ip host 192.168.0.50 host 192.168.0.70
pager lines 24
mtu outside 1500
mtu inside 1500
mtu intf2 1500
ip address outside **.119.167.69 255.255.255.240
ip address inside 172.16.1.253 255.255.254.0
no ip address intf2
ip audit info action alarm
ip audit attack action alarm
ip local pool vpnip 192.168.0.50-192.168.0.70

pdm location 172.16.0.10 255.255.255.255 inside
pdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 10 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 **.119.167.65 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server partnerauth protocol radius
aaa-server partnerauth (inside) host 172.16.0.10 mypass
timeout 5

http server enable
http 172.16.0.0 255.255.254.0 inside

no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec

crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto dynamic-map dynmap 10 set transform-set myset
crypto map mymap 10 ipsec-isakmp dynamic dynmap
crypto map mymap client authentication partnerauth
crypto map mymap interface outside

isakmp enable outside
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400

vpngroup myvpn address-pool vpnip
vpngroup myvpn dns-server 172.16.0.10
vpngroup myvpn wins-server 172.16.0.10
vpngroup myvpn default-domain corpnet
vpngroup myvpn split-tunnel SPLIT
vpngroup myvpn idle-time 1800
vpngroup myvpn password ********

telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80

 

[unclerico]

don't cross post. Your original query has been answered in the PIX forum.

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)