VPN client cannot access the remote network

[teddyteddyteddy]

I can authen the vpn client and obtain the ip the pix lease, but I can only ping the pix ip but not all ip in the remote network, I use the ASDM vpn wizard to init the vpn connection, I would like to ask:

1. Does the default ASDM config is enough for a vpn client to connect and access the remote network?

2. if not, what I have to add? NAT? IPSec Rule?

3. Does the default vpn connection is enable user internet access via VPN? I am only can internet access if i set split tuunel group


I just doing the generic task on vpn, pls give advice, big thanks!!

 

[NetworkGhost]

Check this out. If traffic will be flowing in a interface and will need to go back out that same interface you will need intra-interface enabled. See the following link.

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080734db7.shtml

Free Firewall/Network/Systems Support-

http://firewalls.ath.cx:8080