I'm quite new to PIX.
I've installed PIX506E configured with DTC Radius and Cisco VPN Client.
hq network (172.16.x.x)
|
router (192.168.0.1)
|
branch network (192.168.0.x)
|
pix 506e (192.168.0.2)
|
internet
|
cisco vpn client
I could successfully authenticate and get into the branch network from VPN Client but have been unable to find route to the hq network.
The branch network is NT domain and the default route goes to 192.168.0.1. How do I configure PIX so that VPN remote nodes can access hq network?
I've installed PIX506E configured with DTC Radius and Cisco VPN Client.
hq network (172.16.x.x)
|
router (192.168.0.1)
|
branch network (192.168.0.x)
|
pix 506e (192.168.0.2)
|
internet
|
cisco vpn client
I could successfully authenticate and get into the branch network from VPN Client but have been unable to find route to the hq network.
The branch network is NT domain and the default route goes to 192.168.0.1. How do I configure PIX so that VPN remote nodes can access hq network?