VPN between Watchguard x500 and Zwall with dynamic ip

[joegly]

Hi,

I am trying to create a VPN tunnel between one site with a Watchguard x500 with a static ip and another site with a Zywall 5 with a dynamic ip. Is this possible?

I can replace the zywall 5 with another device but I cannot get a static ip for the site with the zywall 5.

Any help would be greatly appreciated.

Thank you.
Joe

 

[Helenp1983]

Use the domain name as the identification if the Firebox uses DHCP or PPPoE for its external IP address. This
information is in the Firebox configuration. The Firebox uses IP Address and Domain Name to find the VPN
endpoint. User name is a label that you use to identify the user at the VPN endpoint.


dynamic dns

https://www.watchguard.com/support/advancedfaqs/sogen_dyndns.asp

 

[PeterHurst]

I'm not sure it's that easy - I couldn't get it to work that way on a FB1000 with a Zyxel. The authentication wouldn't work until I fixed the IP.

That's not to say I wasn't being a lemon! [Dazed]