I've successfully created a vpn between two cisco pix 501's and now I need to create another vpn between one of the pix firewalls and a netscreen 25 running in transparent mode. The Pix/Netscreen vpn has been unsuccessful. Has anyone configured anything similar to this before?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VPN Between Cisco Pix 501 and Netscreen 25 running in Transparent Mode
- Thread starter JJCP
- Start date
Hi,
Have a look at this:
Regards Colin.
Have a look at this:
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml
Regards Colin.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question