VPN access thru 501 or 506e

[hbalf1]

Hi
On an earlier post some-one recommended link

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/p...

What I do not fathom is I have a home user who dials up to get onto the interent, how will it know what their IP address will be to allow it through PIX? Most of the commands for allowing access specifiy an IP address.
Can any-one explain to me how to allow safe access that will cover dial up accounts, which use DHCP to get their IP form their ISP?
Or am I missing something very critical here
Thanks
Harry

 

[criticalUpdate]

download and use the "unity" client and create access using the vpngroup commands.

Jeff

 

[hbalf1]

Thanks critical -I'll have a go!

 

[themut]

Once you have the unity client (4.X), you can use the link below as a guideline:

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml

 

[hbalf1]

Thanks themut - lovely!