VPN: 2811 to Pix

[ifoam]

We are in the process of switching carriers for our locations. One location is coming online soon but our switchover is not done yet. We are going to have them install a consumer grade isp at the location which will have a static address. This store will use the 192.168.32.x subnet.

How hard, and are there examples, is it to establish a VPN tunnel that will keep the address and not translate them to anything else.

For instance, 192.168.32.2 will be the same host on the other side of the tunnel.

 

[brianinms]

In a typical site-to-site vpn the addresses aren't translated.

 

[ifoam]

Thanks. Link to an example?

 

[brianinms]

http://cisco.com/en/US/products/hw/...s_configuration_example09186a0080094498.shtml