I have 3 BCM 200 4.0 systems, all on the same network. We want to be able to forward messages to other mailboxes on other systems. I have the VPIM key code, but am having trouble setting it up. The Network site properties do not accept my FQDN name. I am using the name from the digital networking properties tab on the other bcm's but it says that it cannot resolve the host name! Any suggestions? Thanks in advance
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VPIM setup
- Thread starter wacker43
- Start date
tnphoneman
Vendor
is the host name in your dns server? Usually that is why a name can not be resolved.
Signature===========================================
Signature===========================================
- Thread starter
- #3
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question