VPIM and QSIG w/ Mitel SX2000 Proacitve Question

[svhtech]

I have an 81C, 25.15 with CallPilot 1.07.09 that we are going set up VPIM and QSIG with a Mitel SX2000. Has anyone out there done this ? We are not anticipating problems but if you've done this and know of any "gotchas" I would like to hear about it. Thank you in advance !

 

[iptuser]

I got this to work, to get it to work we had to use ISO or ISIG version of Q Sig. so for the SX2000 to call the Meridian though we also had in the networok Hicoms. You have to set the Mitel to send all the digits in one go i.e if your extensions on the Meridian is xxxx then then set in the Mitel digits before outpulse had to set to 4 so it waited until the full number was dialed - no overlap sending. i.e if you have location codes to reach the Meridian i.e 8 44 xxxx then digits before outpulse had to be set to 7. aslo set teh sigo i tehMeridain to STD as teh Mitel will not recognise teh NOCS which is sent by teh Meridan is the setting is any thing else

wayne