VP circuit on ATM interface

[ashu6]

I have the following configuration. When I do "show atm vp" does not show anything. Can anyone tell me how do I configure atm vp.

tried creating vp-tunnel, and the router does not seem to have it.

The router is a 2611.


interface ATM1/IMA1
no ip address
no atm ilmi-keepalive
!
interface ATM1/IMA1.1 point-to-point
ip address 61.61.1.2 255.255.255.252
pvc 5/148
encapsulation aal5snap
!
!
interface ATM1/IMA1.2 point-to-point
ip address 65.65.1.2 255.255.255.252
pvc 6/65
encapsulation aal5snap
!
!
interface ATM1/IMA1.3 point-to-point
ip address 66.66.1.2 255.255.255.252
pvc 6/66
encapsulation aal5snap
!
!
interface ATM1/IMA1.4 point-to-point
ip address 67.67.1.1 255.255.255.0
pvc 2/485
oam-pvc manage
encapsulation aal5snap
!
!
interface ATM1/IMA1.5 point-to-point
ip address 69.69.1.1 255.255.255.0
pvc 3/1
oam-pvc manage

 

[ashu6]

sorry 2610

 

[burtsbees]

What does "sh atm vc" or sh atm pvc show?

Burt

 

[ashu6]

Hi Burt

Cisco2600A#sh atm vc
VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells Sts
1/IMA1.4 4 2 485 PVC SNAP UBR 4608 DOWN
1/IMA1.5 7 3 1 PVC SNAP UBR 4608 DOWN
1/IMA1.1 1 5 148 PVC SNAP UBR 4608 UP
1/IMA1.2 2 6 65 PVC SNAP UBR 4608 UP
1/IMA1.3 3 6 66 PVC SNAP UBR 4608 UP