vonage voip

[schtek]

i wonder if anyone can help with some ideas? i have a vonage coonection in the house and i want to set up phones in each room. i have seen the wiring diagrams at vonage forum, but i want to connect it all to a cheap pbx and a exchange 2007 for unified message etc!! i have seen SPA9000 and i wonder if this is a unit i can use...
cheap budget test enviroment.

many thanks


"Practice makes Perfect"
("la pratique rend parfait")
CPO rt'd RN

 

[Westi]

all you need to do is take the output of the vonage box they provide you with and put it into a line port of your pbx, then wire the extensions of the pbx to where you want to use the phones.
I personally don't like vonage as they are way to expensive but it works. The SPA9000 is the ATA that converts the SIP to analog and it does teh same as the Vonage box tehy provided you with. I used the PAP2T from linksys as it is not vendor specific and use a cheap SIP provider instead, before I bought myself a SIP capable phone system.

Joe W.

FHandw., ACS

If you can't be good, be good at it!